Suspending & Resuming Your Pump
Suspending Your Pump
Device: 523/723 (Revel), 522/722, 515/715, 512/712
Important
Suspend stops all insulin delivery, including the current basal and any bolus or Fill Cannula deliveries in progress. While suspended, your pump will not deliver insulin until you resume your pump. The pump will beep or vibrate about every 15 minutes on the hour to remind you that it is not delivering insulin. When suspended, your pump is in Attention mode with a solid circle showing on the pump. When in Suspend, you can only Resume or view the STATUS screen. If the Sensor feature is turned on, you can also view the sensor graphs and the SENSOR STATUS screen. No other functions are available.
Select Suspend from the MAIN MENU, and press ACT.
Main Menu > Suspend
SUSPEND will flash on your screen. Press ACT to stop your pump.
The screen will show that the pump is suspended and the time it stopped. After less than one minute, the pump will return to the HOME screen with a solid circle.
You can verify on your pump STATUS screen that your pump is suspended.
Resuming Your Pump
Device: 523/723 (Revel), 522/722, 515/715, 512/712
Important
When you resume your pump, the basal delivery will continue. However any bolus or Fill Cannula delivery stopped by Suspend will not restart when you resume your pump. You must reprogram and activate it to finish delivery.
From any screen, press ACT until the RESUME screen appears. Press ACT again.
Your pump will beep once, then the HOME screen will appear without the solid circle.
Font Size/Page Zoom